Distribution transformer / padmount 10 kV

10 kV Distribution transformer / padmount

Skype : mark2002719 email: mark2002719@gmail.com

10kV Pad-mounted Transformer

Application: outdoor service, mainly for power distribution.

Standards: IEC 60076-1, IEC 60076-2, IEC 60076-3, IEC 60076-5; ANSI, IEEE, AS, etc.

Parameters:

Rated Voltage: 50/60Hz 10kV.

Rated Capacity: 100-1000kVA.

Features:

 US type distribution pad-mounted transformer with HV &LV compartments, easy for operation.

 High security and reliability in operation.

 Economic and efficient to reduce network loss and working cost.

 Low temperature rise.

 Low noise.

 Customized transformers are available on your requirement.

Rated capacity (kVA): 100 to 1250

Rated voltage and tapping range:

- HV: 10

- Tapping range: ±2×2.5

- LV: 0.4

Vector group: Dyn11

No load losses (W): 200 to 1360

On load losses (W): 1500 to 12000

Impedance voltage (%): 4 to 4.5

No load current (%): 1.6 to 0.6

* All the data are only examples for your reference.

* Customized transformers are available according to your requirements.

Comments

SF6 gas insulated circuit breaker / high-voltage 40.5 kV | LW8

SF6 gas insulated circuit breaker / high-voltage 40.5 kV | LW8 Skype : mark2002719 email : mark2002719@gmail.com LW8 40.5 kV SF6 Circuit Breaker Application: for control and protection of 40.5 kV power system. Ratings: 40.5kV, 2000A Standards: IEC 62271-100 Features:  With CT14 spring operation mechanism.  High breaking capacity.  Secure and reliable operation.  Applicable for frequent operation; easy or free of maintenance. Technical Data: Rated voltage (kV):40.5 Rated current (A): 2000 Rated short-circuit breaking current for Isc: 31.5; 25; 31.5; 25 Rated short-time withstands current/continuous time (kA/s): 31.5/4; 25/4; 31.5/4; 25/4 Rated withstands current (peak): 80; 63; 80; 63 Rated short-circuit making current (peak) (kA): 80; 63; 80; 63 Power frequency withstands voltage for 1min (Breaks) (kV): 95+24; 95; 95; 95 Power frequency withstands voltage for 1min (To earth) (kV): 95; 95; 95; 95 Lighting impulse with...

DDS226D-4P Single-phase Din-rail Energy Meter

DDS226D-4P Single-phase Din-rail Energy Meter (same quality as Chint energy meter) DDS226D-4P Single-phase Din-rail Energy Meter (same quality as Chint energy meter) General DDS226D-4P type single-phase din-rail energy meter can accurately and directly measure 50Hz/60Hz active energy consumption from single phase AC electricity net with functions of good reliability, small volume, light weight, specious appearance,convenient installation, etc. All of the performances accord with the National Standard GB/T17215.321-2008 and International Standard IEC62053-21. Function and features 1.Measuring single phase total active energy power. 2.May select step motor type impulse register display 5+1 digits (99999.9KWh) or LCD 5+2 digits display, LCD 5+2(99999.99KWh), 5+1 digits(99999.9KWh) and 6+1 (999999.9KWh); 3.Passive impulse output, comply to DIN43864 Standard; 4.Two LED indicate power condition and energy impulse signal; 5.35mm standard DIN rail i...

CM1 MCCB Circuit breaker(moulded case circuit breaker)

CM1 MCCB Circuit breaker(moulded case circuit breaker) (Same quality as Chint electric circuit breaker/mccb) General of 2 poles mccb MCCB: Moulded Case Circuit Breaker , These are using at High rating currents from 63A to 1600A ,with short circuit and earth leakage protection (Same quality as Chint electric circuit breaker/mccb) 1.1 Electric ratings: AC 690V, 50/60Hz, 10~800A; 1.2 Mounting mode: vertical and horizontal; 1.3 Standard: IEC/EN 60947-2 MCCB Application YCM1 series Circu breaker is suitable for the circuit of AC50/60Hz,rated current up to 630A,rated operating voltage 690V or less.The series circuit breaker in the distribution network,can be used for distributing the energy or electricity and protecting the circuit and power device against the overload,short circuit and undervoltage.the circuit breaker with frame rated cu...

CNC electric LTD

Search This Blog